Series DHD Water Well DTH Hammer are designed as a hammer drill. They differ from other rock drills, however, through continuous operation down agains
-
20Mar, 2023Operation and maintenance Of Water Well DTH Hammer
-
08Feb, 2023How to chose the “DTH drilling tools”?
Typically, there is a 3/4" to 1 12" difference in diameter between the drill bit and drill pipe. It is essential to guarantee that the air compressor
-
12Dec, 2022Why DTH Button Bit was Worn?
DTH Button bit wear patterns vary depending on the type of ground and the drilling parameters:
-
12Dec, 2022Failure of Rock Drill Extension Rod and requirements for steel grades
Fatigue fracture is the most common kind of failure for Rock Drill Extension Rod, which primarily occur in the threaded part and transition groove reg
-
12Dec, 2022Application of Button Drill Bits
The tooth series has a long cycle of passivation, and its non-wear life is about 5-6 times of the grinding life of the same diameter blade head.
-
09Dec, 2022How to Protect Drill Bit from Bit Head - Steel Damages?
Causes and Remedies of Bit Head - Steel Damages
-
09Dec, 2022Difference between DTH Drilling and Top Hammer Drilling
One: While DTH Drilling and Top Hammer Drilling operate similarly, their impact forces differ: DTH Drilling impact force acts on the hammer head---bit
-
08Dec, 2022Assembly of the DTH Drill Hammer(2)
Second part of DTH hammer assembly.
-
08Dec, 2022Assembly of the DTH Drill Hammer(1)
The assembly process of the DTH Drill Hammer is actually the reverse process of the disassembly of the DTH Drill Hammer.
-
08Dec, 2022DTH Button Bits Replacement
Disassembly Instructions for DTH Button Bits
-
08Dec, 2022DTH Drill Hammer Disassembly(1)
The first part of DTH Drill Hammer disassembly
-
08Dec, 2022DTH Drill Hammer disassembly(2)
Second part of DTH Drill Hammer disassembly













