Dth Hammer Supplier

 

 

As a dth hammer supplier, we produce rock drilling tools for mining, tunneling, construction, and rock drilling related industries.

For more than two decades, LEANOMS has been striving to provide customers reliable rock drilling consumables to consistently save their total drill cost.

LEANOMS, a dth hammer supplier, mainly produces rock drilling tools for mining, construction and related industries. Since its foundation in 1997, LEANOMS has been striving to provide customers with fast, stable and economical solutions for rock drilling, and effectively help them reduce rock drilling cost. Now LEANOMS has been a specialized manufacturer of rock drilling tools with integration of R&D, production, related products suppling and solution consultancy.

With constant efforts for more than 20 years, not only does LEANOMS, a dth hammer supplier, own its own factories and laboratory but also has established strategic partnership with a number of outstanding raw material vendors. We can offer customers custom-made services solution based upon the full understanding of their specific requirements, and a wide range of actual performance tests of our products under the rigorous control on production quality and supplying system.

 

LEANOMS, a dth hammer supplier, we have factory:

Area of our factory: over 45,000SQM;
Numbers of our employees: over 800;
Numbers of our equipment &facilities: Over 400 sets
Delivery deadline: 4 weeks for conventional model drilling tools.

 

LEANOMS, a dth hammer supplier, our amount of sales,

Numbers of DTH Hammer production yearly: over 30,000 sets；
Numbers of Drill bits production yearly: over 350,000 pcs；
Annual turnover of USD: 20 Million；

 

 

Proper Maintenance:

Regularly inspect the DTH hammer for signs of wear, damage, or loose components.
Clean the hammer after each use to remove dirt, debris, and drilling mud.
Lubricate the hammer's moving parts as recommended by the manufacturer.

Correct Operating Parameters:

Ensure the hammer is operated within its recommended pressure and flow rate limits. Exceeding these limits can cause premature wear.
Use the appropriate size and type of drill bit for the job to minimize stress on the hammer.

 

Drilling Techniques:

Avoid excessive impact forces and maintain a consistent drilling speed to prevent excessive wear on the hammer's internal components.
Minimize over-drilling, which can lead to unnecessary wear and tear.

Quality Drill Rods and Bits:

Use high-quality drill rods and bits to reduce the likelihood of damage to the hammer and improve drilling efficiency.

 

Proper Alignment:

Ensure the drill string and DTH hammer are properly aligned to reduce side loading, which can cause uneven wear.

 

 

 

 

Technical Parameters Of DHD3.5 IR3.5 DTH Hammer Bits:

 

Part Description	Part Number
1 Top Sub	LR-DHD3.5A-01
2 "O" Ring of Top Sub	LR-DHD3.5A-02
3 Check Valve	LR-DHD3.5A-03
4 Spring	LR-DHD3.5A-04
5 Air Distributor	LR-DHD3.5A-05
6 Internal Cylinder	LR-DHD3.5A-06
7 Piston	LR-DHD3.5A-07
8 External Cylinder	LR-DHD3.5A-08
9 Guided Sleeve	LR-DHD3.5A-09
10 "O" Ring of Stop Ring	LR-DHD3.5A-10
11 Stop Ring	LR-DHD3.5A-11
12 Drive Chuck	LR-DHD3.5A-1

     

 

 

Diameter		Gauge Buttons (mm)	Front Buttons(mm)				Weight(KG)	Part Number
mm	Inch		Flat Face	Convex Face	Concave Face	Face Type
90	3 1/2	Φ14*6	Φ12*2	Φ13*2	/	Convex Face	4.5	LR-DHD3.5-90CV
90	3 1/2	Φ14*6	Φ12*4	/	/	Flat Face	4.5	LR-DHD3.5-90FF
95	3 3/4	Φ14*6	Φ13*2	Φ13*2	/	Convex Face	4.6	LR-DHD3.5-95CV
100	3 15/16	Φ14*6	Φ13*2	Φ13*3	/	Convex Face	4.8	LR-DHD3.5-100CV
105	4 1/8	Φ14*6	Φ13*2	Φ13*3	/	Convex Face	5.0	LR-DHD3.5-105CV
105	4 1/8	Φ13*8	Φ12*6	/	/	Flat Face	5.0	LR-DHD3.5-105FF