DTH Drill Bit For Water Well Drilling

 

DTH Drill Bit For Water Well Drilling is a type of drill bit that are used in DTH drilling. They have tungsten carbide buttons or inserts that are pressed into the bit's face to provide improved wear resistance and cutting ability. These buttons come in various shapes and sizes depending on the specific drilling application and rock formation.

 

 

1. The DTH Drill Bit For Water Well Drilling is clogged or stuck:
Possible reasons: The drill bit encountered particularly hard or large rocks, causing it to get stuck.
Troubleshooting method: Increase drilling pressure and use rotation to try to loosen the stuck drill bit. If the sticking problem persists, it may be necessary to replace the drill bit with one that is more suitable for the current geological conditions.

2. The DTH Drill Bit For Water Well Drilling wears too fast:
Possible reasons: The drill bit is not hard enough, or the rock is too hard.
Troubleshooting method: Choose a more wear-resistant drill bit and ensure that the hardness of the drill bit matches the hardness of the rock. Check the drill bit regularly and replace it in time if it is found to be wearing too fast.

3. The DTH Drill Bit For Water Well Drilling loses directionality:
Possible reasons: The drill bit's guide device is damaged or it is subject to external interference during drilling.
Troubleshooting: Check and repair the guide device to ensure it is working properly. In the case of possible external interference, take appropriate measures, such as increasing support or reducing vibration.

4. The DTH Drill Bit For Water Well Drilling loses impact force:
Possible reasons: Air source or hydraulic system failure, internal parts of the drill bit are damaged.
Troubleshooting method: Check the air source or hydraulic system to ensure it is working properly. If the problem persists, the drill may need to be disassembled for internal inspection and repair.

5. The drill Bit For Water Well Drilling is eccentric or unstable:
Possible reasons: The rock formation is uneven during drilling, or the drill bit is improperly designed.
Troubleshooting method: Adjust drilling parameters to ensure the stability of the drill bit in different formations. If the problem persists, it may be necessary to replace the drill bit with one suitable for the current geological conditions.

6. The connection part of the drill bit is worn or damaged:
Possible reasons: The drill bit connection part is under excessive pressure, or the connection part is not properly designed.
Troubleshooting method: Check the wear of the connecting part to ensure that the drill bit is firmly connected. If the connecting part is damaged, it needs to be replaced with a new connecting part or the entire drill bit.

 

 

LEANOMS DTH Drill Bits can even handle the hardest conditions, offering optimal solutions for drilling.

 

The optimal performance of LEANOMS DTH Drill Bits includes:

Excellent drilling speed

Superior durability

Precise drilling

 

The best hole quality and the most meters drilled per hour make the lowest production cost possible.

 

 

 

LEANOMS has got the certification of API and ISO 9001 since 2009. We devote ourselves to developing high technology and designing new high
efficiency products. That’s why We have gained so many patents today. As you can see, we have won many honors such as High-tech enterprise,
Chinese well-known trade mark.